The Online World by Odd De Presno

will do the job for you. Still, take a few minutes and browse through the text. It may enable you to handle unexpected problems better. Our example assumes that you have an MS-DOS computer. Not because this is the best microcomputer in the world, but because there are more of them than anything else. We assume that you have an external, intelligent Hayes-compatible modem and the communications program Procomm (version 2.4.2). In this example, your modem is tested by calling my bulletin board at +47 370 31378. Not because this is the best board in the world, but because I have full control over how it looks and feels for those using it. Assembling the equipment ------------------------ You have the modem, the cable (to connect your modem with the computer), a phone cable (to connect your modem with the phone or the wall jack), and a communications program. Check that the modem's power switch is off. Place the modem by the computer, and plug the power supply cord (or the power adapter cord) into the AC wall socket. Switch on the modem. Do NOT use 115-volt equipment in 250-volt sockets! Connect modem and computer using the modem cable. There may be several optional sockets on the computer. These are usually marked RS-232, COMMS, MODEM, or just nothing. The connector may be of a flat 25-pins, 9 pins, or a round 8-pins type. Use communication port number 1, 2, or whatever else is available for this purpose. If you have several options, and the socket for communication port number 1 seems free, use this. If not, try one of the others. Next, connect the modem to the telephone line. If in luck, the modem came with a phone cable that works with your setup. If so, it is simple: