All about coffee by William H. Ukers

Moisten 10 grams of the finely powdered sample with alcohol, transfer to a Soxhlet, or similar extraction apparatus, and extract with alcohol for 8 hours. (Care should be exercised to assure complete extraction.) Transfer the extract with the aid of hot water to a porcelain dish containing 10 grams of heavy magnesium oxid in suspension in 100 cc. of water. (This reagent should meet the U.S.P. requirements.) Evaporate slowly on the steam bath with frequent stirring to a dry, powdery mass. Rub the residue with a pestle into a paste with boiling water. Transfer with hot water to a smooth filter, cleaning the dish with a rubber-tipped glass rod. Collect the filtrate in a liter flask marked at 250 cc. and wash with boiling water until the filtrate reaches the mark. Add 10 cc. of 10-percent sulphuric acid and boil gently for 30 minutes with a funnel in the neck of the flask. Cool and filter through a moistened double paper into a separatory funnel and wash with small portions of 0.5-percent sulphuric acid. Extract with six successive 25-cc. portions of chloroform. Wash the combined chloroform extracts in a separatory funnel with 5 cc. of 1-percent potassium hydroxid solution. Filter the chloroform into an Erlenmeyer flask. Wash the potassium hydroxid with 2 portions of chloroform of 10 cc. each, adding them to the flask together with the chloroform washings of the filter paper. Evaporate or distil on the steam bath to a small volume (10-15 cc.), transfer with chloroform to a tared beaker, evaporate carefully, dry for 30 minutes in a water oven, and weigh. The purity of the residue can be tested by determining nitrogen and multiplying by the factor 3.464.